Announcement

Collapse
No announcement yet.

Mixer help please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • eclectiktronik
    replied
    Sorry, meant to say open it up and post a photo of the cable /crossfader which you suspect as being the cause of the fault.
    Whilst in there, inspect the board for loose connections and cracked solder joints. You never know, it could be the connection rather than the actual wire.

    Leave a comment:


  • Headless mermaid
    replied
    Originally posted by eclectiktronik View Post
    Ideally you'd need the service manual and part number, or at least some technical information/spec of that part to be able to proceed.
    Post a photo and I'll see what I can do.
    Don't have manual or photo but it's the Numark DM1050, looks like this. Seems the problem is a loose connection in the "belt" of wires which connects the crossfader and the inner electronics.

    Leave a comment:


  • eclectiktronik
    replied
    Ideally you'd need the service manual and part number, or at least some technical information/spec of that part to be able to proceed.
    Post a photo and I'll see what I can do.

    Leave a comment:


  • Headless mermaid
    started a topic Mixer help please

    Mixer help please

    Hope this is the correct forum:

    I have a mixer-problem someone might be able to help me with:
    Is there a way to fix a loose connection in the "belt"/cable which connects the crossfader with the inside electronics of a Numark DM1050 mixer? A permenant solution besides just twistin it a little every now and then (pause)? Thanks.
Working...
X